ARCHON J2 Diving LaserLight/Scuba Diving Flashlight/Underwater Light/Diving torch/Diving lamp
Archon J 2 Diving Light with Green Laser
SPECIFICATIONS：
Model：J2 Diving Light with Green Laser
Bulb：1* Luminus White LED(color temperature：6500K) &1*Green laser LED
Max brightness level：1000 lumens for White light，1W for Green laser
Output levels：White high>low>strobe(and/or Green laser)
Runtime：White only：high 2.5 hours，low 4 hours，strobe 3 hours；Green laser only 30 hours；
White(with Green laser) ：high 1.5 hours，low 3 hours，strobe 2.5 hours
Reflector：glossy aluminum reflector(White light only)
Angle of light beam：10°(White light only)
Lens：3mmand2mm toughened glass
Body material：durable aluminum
Surface treatment：premium anodizing in black & green
Battery：1*21700Li-ionbatterywithBMS
With battery over-discharging protection，polarity reversing protection
Operation voltage：4.2Vto3V
Waterproof：up to 100 Meters
Dimensions：147.5mm(length) *28mm(dia. of light body) *46mm(dia. of light head or rear end)
Weight in air：approx.201g.(without battery) ；approx.275g.(with battery)
Weight in water：approx.138g.(with battery)
LOW BATTERY WARNING：
The light flashes 3 times when the power capacity reaches 10-5%，and repeats after 5 seconds. If the current mode is Green laser，it switches off after the flashing. If the current mode is White
light，it switches to lower brightness level after the flashing，and switches off automatically when the power capacity is less than 5%to prevent over-discharging battery.
BATTERY INSTALLATION：
1.Hold the light with its head pointing upward, unscrew the light head
2.Remove the used battery from the battery compartment, if there is any；and put in the fully charged battery per polarity signs.
3.Screw the light head down. Do not over tighten to break the O-ring
BATTERY CHARGING：
1.Please charge the battery before the first use.
2.Please connect the USB plug of the charging cable to the charging device，and its type-C plug to the battery's charge port. The charge indicator lights in red if the charging is in process；and it turns green after the charging is completed.
3.Please keep the charging device and battery away from the flammable or explosive material.
4.Please carryout charging under monitoring，and unplug the cable when it is finished
MODES CHANGING：
1.When the light head points upward，the upper switch is for White light，and the lower switch for Green laser. Click White light switch to cycle through high，low，strobe，and off；White light may also be turned off by pressing and holding the switch for 3 seconds. Click laser switch to turn on or off the Green laser light.
2.Both White light and Green laser can be turned on or off simultaneously or separately.
