ARCHON WG66 Professional Scuba diving goodman handle torch depth 200 meter diving light/Diving torch/Diving lamp
1.Securely sealed magnetic switch for superior water resistance
2.Waterproof grade IP-68,200meters diving depth.
3.5mm Polycarbonate board lens for diving
CREE XM-L2 U2 LED*6(white)
||HA III Grade
||Green 100%-50% Yellow 50%-30%
||Red 30%-10% Red Flashing Bellow 10%
Model:WG66 Searchlight Weight(With battery pack):1187g
LED Type:CREE XM-L2 U2 LED*6 Waterproof:200M underwate
Modes: Hight>Low>Strobe V Lens:8mm Polycarbonate Board
Color temperatrue:6500K(white light) Reflector:Glossy Aluminum reflector
Runtime:Hight ( 2.0H ) Low(4.0H) Strobe:(3.0H) Body material:Durable aircraft-grade aluminum
Angle of light beam:110° periphery,8°hot spot Surface treatmen:Premium Type III hard-anodizing
Battery:Rechargeable Li-ion battery pack(18650 battery*6) Fully charging:8-10H
Battery Indicator: Green 100%-50% Max output:5000LM Flashlight
Yellow 50%-30% Runtime:Max Output 5000Lumens,120mins
Red 30%-10% Dimensions:213.5mm(canister length)
Red Flashing Below 10% 78.0mm(dia.of light head)
Switch Off Below 5%
1.Plug the charger in the wall power socket, the indicator light is green
in the free-load status.
2.Plug the port of the charger in the ports on the light. (the positive and
negative polar doesn't matter, both ways work.)
3.The indicator light on the charger is red if the battery is not fully
charged; it will turn green after fully charged.
4.Take out the charger and use the light.
Push the switch to turn it ON.
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
1.Please put the switch sleeve on light head during transportation to prevent it from misoperation.
2.If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times still it move smoothly again,then clean the light in the fresh water.
3.Please charge the light every time after using. If it isn't used for a long time, please charge the light once every 3 months to prepare for next time using.
|Place of Origin:
Guangdong, China (Mainland)
Li-ion battery inside
|Lamp Body Material:
9V to 13V
Packaging & Delivery
||EVA box packing, including light and charger.
||depends on order quantity(1-25 working days)