ARCHON WG76W/D100W-II DC Charging Diving Light/Scuba Diving Flashlight/Underwater Camera Light/Diving Video torch/Diving lamp/
With Light Source:Yes
Lamp Body Material:Aluminum
Bulb:White CREE Xm-L2 U2 LED *12
Output:Max 10000 Lumens
Modes:High>Medium> Low>Red> off
Runtime:High (1.5h); Medium (3.0h); Low (5.0h); Red (8.0h)
Color Temperature:5000k(White Light)
Body Material:Durable Aircraft-Grade Aluminum
Angle of Light Beam:120 Degree
Charge Way:Can Be Charged Directly on The Light, with Battery
Underwater Weight:560 Grams (with Battery Pack)
Packing:EVA Gift Packing.
Origin:Shenzhen of China
Production Capacity:500, 00
Archon WG76W Goodman Handle Diving Video Light Underwater Photographing Light Dive Light CREE LED Max 10000 Lumens
1.Model: WG76W Goodman Handle Diving Video Light
2.Bulb: White CREE XM-L2 U2 LED *12 (max 6500 Lumens);
Red CREE XP-E N3*4 (wavelength 620nm, max 400 Lumens)
3.Modes: High>Medium> Low>Red> off
4.Runtime:High (1.5h); Medium (3.0h); Low (5.0h); Red (8.0h)
5.Color temperature: 5000K (white light);
6.Reflector: No hotspot design, no reflector;
7.Lens: 5mm Polycarbonate Board;
8.Body material: Durable aircraft-grade aluminum;
9.Angle of light beam: 120°
10.Surface treatment: Premium Type III hard-anodizing;
12.Battery: Rechargeable Li- ion battery pack (18650 battery*6);
13.Battery Indicator: 100%-50%: Green; 50%-30%: Yellow; 30%-10%:
Red; Below 10%: Red Flashing; Below 5%: switch off;
14.Can be charged directly on the light, with battery over-discharging
protection, polarity reversing protection.
15.Fully charging time: 8-10h;
16.With gas release valve
17.Operation voltage: 9V to 13V;
18.Waterproof: 100 meters underwater
19.Dimensions: 213.5mm (length)* 78.0mm (dia. of head);
20.Weight: 1140 grams (with battery pack)
21.Underwater Weight: 560 grams (with battery pack)
22.Impact resistance: 1.5M.
1. Plug the charger in the wall power socket, the indicator light is green
in the free-load status.
2. Plug the charger in the ports on the light. (the positive and negative
polar doesn't matter, both ways work.)
3. The indicator light on the charger is red if the battery is not fully
charged; it will turn green after fully charged.
4. Take out the charger and use the light.
Push the switch to turn it ON.
Successive push the switch ON-OFF within two seconds to cycle through High, Medium, Low, Red, OFF.